100v Amplifiers
PA 2120 L
#82MEG212
Amplifier. 2 x 120 W @ L70 / 100V. Switch mode power supply. Volume control on each channel. 1 HU Rack 19''.
PA 2120 L is an installation amplifier with 2 channels of 120W each, class D. It can work both in 70V and 100V line (selectable through dip-switches). Each channel has its own volume control and LED indicators (signal, clip, and protect). The PA 2120 L amplifier integrates various protections such as short circuit, thermal, ultrasound and RF. Its inputs and outputs are connected through Euroblock terminals, and it has dimensions of 1 HU rack 19 ''.
Main information
- Switch mode power supply.
- 70 / 100V operation (selectable).
- Volume control on each channel.
- 1 HU Rack 19 inch.
Product main measures (m)
0.27 x
0.48 x
0.04
| Type | 70/100 V line |
| Power | 2 x 120 W |
| Input Sensitivity | 1V (±0.1V) / 1V (±0.1V) |
| Input Impedance | 20kOhm (balanceada) 10kOhm (desbalanceada) / 20kOhm (balanced) 10kOhm (unbalanced) |
| Frequency Response | 100 Hz - 15 kHz |
| Gain | 40 dB |
| THD+N | < 0.1% |
| S/N ratio | > 95 dB |
| Damping Factor | > 200 |
| Crosstalk | > 70 dB |
| Connectors | IN and OUT: Euroblock |
| Controls | Independent volume per channel |
| Protections | Short circuit, open circuit, over temperature, ultrasonic and RF |
| Power supply | AC 110-240V, 50/60 Hz |
| Dimensions | 483 x 44 x 272 mm |
| Weight | 4 Kg |
| Length(m) | Width(m) | Height(m) | Weight(kg) | |
|---|---|---|---|---|
| Product | 0.27 | 0.48 | 0.04 | 4.00 |
| Box | 0.34 | 0.54 | 0.11 | 5.14 |
| Master Carton | 0.39 | 0.56 | 0.47 | 21.54 |
PA 2120 L | Acoustic Simulator
Optimise your PA 2120 L with our Acoustic Simulator
With this online tool you can quickly design your PA system, calculating how many speakers and amplifiers you need and where to place them.
Learn more about the online simulatorEnhance your order
You might also be interested in these products
