






discontinued
ZENITH 1300
#51ZEN130
2 x 500 W @ 4 Ohm power amplifier. Switching power supply.
Zenith 1300 is a 2-channel 500 W @ 4 Ohm professional audio amplifier, with switching power supply, built in a 2 rack unit metal enclosure. It has balanced inputs in XLR3 format and 1/4" TRS jack and outputs with XLN4 connectors. It has selectors for input sensitivity, operating mode and bass boost. It also has protection systems against short circuit, temperature, DC, VHF and constant high frequency signal The front panel has a power switch, independent volume controls for each channel and indicators for power, signal, clip, protection and operating mode.
Main information
- Switching power supply.
- Minimun output impedance 2 Ohm.
- Stereo, paralel and bridge mode.
- Front power and volume control.
Product main measures (m)
0.36 x
0.48 x
0.09
Type | Class AB |
W/Ch @ 8/4/2 Ohm | 310 W / 500 W / 600 W |
W/Ch @ 8/4 Ohm Bridge | 1000 W / 1200 W |
Frequency Range | 20 Hz - 20 KHz |
THD+N | <0.05% |
S/N Rate | >100 dB |
Damping Factor | >200 |
Dynamic Range | >80 dB |
Gain | 26/32 dB |
Input Impedance | 20 KOhm balanceada, 10 KOhm desbalanceada./ 20 KOhm balanced, 10 KOhm unbalanced. |
Input Sensitivity | 10.10 dBu / 4.11 dBu |
Connections | Power: 1 x IEC. Audio input: 2 x XLR3 female, 2 x 1/4" TRS Jack. Amp output: 2 x XLN4 female. |
Protections | Overheating, VHF, short circuit, AC lower, DC protection, CLIP / Limit. |
Length(m) | Width(m) | Height(m) | Weight(kg) | |
---|---|---|---|---|
Product | 0.36 | 0.48 | 0.09 | 7.70 |
Box | 0.50 | 0.58 | 0.16 | 8.54 |
Enhance your order
You might also be interested in these products
