Control and Systems
WIR 1
50SIN001
Stereo audio WIFI receiver.
WIR 1 is a Wi-Fi audio receiver in the operating free band ISM 2.4 GHz which has two modes of operation: AP (Access Point) or STA (Station). Its XLR balanced output, its robust and metallic enclosure and its optimized antenna for a better coverage make it suitable for professional use.
|
Power Supply |
DC 5V - 1A 50/60 Hz |
|
Consumption |
< 300 mA |
|
Frequency |
2404-2476MHz |
|
Sampling frequency |
192 kHz |
|
Receive Sensitivity |
-84dBm (min.) |
|
Output Level |
+0dBu |
|
Frequency Response |
20Hz - 19.5kHz, +3dB / -3dB |
|
S/N |
>85 dB |
|
Dynamic Range @ 1 kHz |
>85 dB |
|
Crosstalk @ 1kHz |
>90 dB |
|
THD |
<0.1% |
|
Dimensions (WxHxD) |
120x41x151 mm |
|
Weight |
360 g |
| Length(m) | Width(m) | Height(m) | Weight(kg) | |
|---|---|---|---|---|
| Product | 0.15 | 0.12 | 0.04 | 0.36 |
| Box | 0.23 | 0.17 | 0.65 | 0.70 |
| Master Carton | 0.49 | 0.36 | 0.37 | 14.92 |
- Wi-Fi audio receiver.
- Operating Band ISM 2.4GHz (free band).
- AP (Access Point) and STA (station) modes supported.
- UPnP, DLNA and Airplay supported.
- 5dBi external antenna to increase the coverage area.
- Streams the audio from external devices (smartphones, tablets, PC, ...).
- Supports up to 24bit 192 kHz sample rate stream audio.
- Coverage area higher than 15 meters in AP mode. In STA mode it depends on the existing Wi-Fi network coverage.
- Balanced XLR and unbalanced ¼'' jack outputs.
- Robust enclosure.
Manual | WIR 1 - MANUAL v1.1 |  | Download |
So far, there are no questions related to this product.
Register to be able to ask a question about this product.
Alternative Products
Bluetooth audio receiver. V2.1 + EDR. 20 meters.WRB 2