Passive loudspeaker 200 W @ 8 Ohm. 8 x 2.75'' Woofer. IP 65. White or black colour.


The UDA 8 is a high output, full range, frequency shaded passive column speaker which provides voice intelligibility and musical clarity in acoustically challenging environments such as shopping malls, houses of worship, restaurants, congress halls, hotels, airports, train stations, swimming pools, conference rooms or museums, where reflective surfaces create a reverberant sound field. 

The UDA 8 features eight 2.75" diameter transducers, 0.75" voice coil, in a closed box enclosure. A proprietary IST (Interdependent Shading Topology) network has been designed to keep constant the ratio wavelength-column size, which results in a controlled 20° vertical coverage in the vocal range. This makes the UDA series suitable to be installed in rooms with problematic sound reflections where vocal intelligibility is paramount.

The narrow extruded aluminium enclosure has been designed for a seamless visual integration in every venue and is available in black or white finish. The grille is also made of aluminium and internally covered with a protective water repellent fabric which prevents splashed water and dust from damaging the transducers, featuring thereby an IP 65 protection rating. A wall mounting accessory is included allowing the column to be aimed up to +/- 90° sideways and from 0° to 10° downwards or upwards in two degrees steps. 

Each unit can be connected to either the input terminal strip or an NL4 Speakon. Connections are protected by a metallic weather resistant cover featuring a cable gland on the bottom which prevents water or moisture from causing a shortcircuit. 

The accessory UDA 16 TL (not included) allows for high impedance connection of the UDA 8. It houses a high quality 120Wrms@100V line transformer (60Wrms@70V) that makes it suitable for installations where long cables have to be deployed. 

Tuning presets are available to enhance the frequency balance and intelligibility.

  • Passive column speaker.
  • Suited for reverberant environments.
  • 20° Vertical, 140° Horizontal Coverage.
  • 200W Program.
  • Stylish and visually discreet design.
  • Extruded aluminium enclosure.
  • Low and High impedance available.
  • Available in black or white finish.


PARAMETER
UDA 8
Transducers
8 x 2.75'' Diameter
Nominal Impedance
8 ohm
Minimun Impedance
8.6 ohm @ 595 Hz
RMS Power (1)
100W (28.3V rms)
Program Power (2)
200W
Peak Power (3)
400W (56.6V peak)
Sensitivity (2.83v @ 1m)
93 dB SPL
Peak SPL (4)
119 dB SPL
Frequency Range (5)
150Hz to 23Khz (-10dB)
170Hz to 20kHz (-6dB)
High Frequencies
Centre
Recommended High Pass Filter
Butterworth 24dB/Oct, 100Hz
Horizontal Coverage (-6dB)
140°
Vertical Coverage (-6dB)
20°
IP Rating
IP65
Enclosure
Aluminium
Grille
Aluminium, water proof fabric backing
Connectors
Speakon and barrier strip
Color
Black or white
Rigging
Wall mounting accessory Wall 16. +/-90° horizontal & from 0° to 10° downwards or upwards in two degrees steps
Dimensions (HxWxD)
575x104x116 mm
22.6x4.1x4.6 in
Net Weight
5.1Kg
11.2 lb
Included accessories
Wall mounting accessory Wall 16
Optional accessories
UDA 16 TL
(1) Based on a 2h power test run with pink noise, 6 dB crest factor, IEC filtered.
(2) Conventionally, 3dB higher than the RMS power
(3) Corresponds to the crest factor for the test described in (1)
(4) Calculated based on Peak Power and sensitivity
(5) Free field

  Manual
Download
  Datasheet
Download
  Software
Download
  Software
Download
  Software
Download

Related Products

  • UDA 16
  • UDA 16 TL
  • WPE 26N
  • WPE 48 N