PA 200 MX

Amplifier/mixer. 2x100W 8 ohm/70/100V. RJ45 (RS 485 commands). Bluetooth

Amplifier/mixer. 2x100W 8 ohm/70/100V. RJ45 (RS 485 commands). Bluetooth

 PA 200 MX is an installation amplifier which incorporates 3 LINE inputs (INPUT 1 with BLUETOOTH function) with selector and its own volume control, two tone controls and LEDs which mark the signal presence and limit mode. Additionally, the amplifier incorporates microphone input, providing a mixing function and adding several features which set the system according to the installation requirements.

The functions that can be set are:

  • MIC priority
  • Mono/stereo input mode
  • 3 gain levels in MIC input
  • 3 anti-feedback presets in MIC input
PA 200 MX can operate with low impedance or 70/100V line loudspeakers.

The operating mode is selected through a switch in the rear side and a dipswitch block which has some terminals reserved for future improvements.

In the rear side is allocated a RJ45 connector which admit RS485 commands from an external device in order to control some features.

Output power
2x100W @ 8 ohm / 200W (70/100V Line)
Audio inputs
3 LINE (unbalanced), 1 MIC, 1 RJ45 (RS485 commands)
1 kHz, 15W, 8 Ohm/16 Ohm <= 0.1%
1 kHz, 30W, 70V/100V <= 0.2%
Frequency response
20 Hz - 20 kHz 0dB - 0.5dB
Main Supply AC power
100-240 V  -  50/60Hz
Dimensions (WxHxD)
215x48x264 mm
Weight2.3 Kg