PA 200
PA 200 is an installed sound amplifier that can operate with low impedance or 70/100 V line loudspeakers. The operating mode is selected through a switch in the rear side and a dispswitch block which has some terminals reserved for future improvements. It incorporates switching power. It also incorporates an unbalanced LINE input with its own volume control and LEDs which mark the signal presence anda limit state. In the rear side is allocated a RJ45 connector which admits RS485 commands from an external device in order to control some features.
|
Output power |
2x100W @ 8Ohm/200W (70/100V Line) |
|
Inputs |
1 LINE (Audio),1 RJ45 (RS485 commands) |
|
THD+N |
1kHz,15W,8/16 Ohm <=0.1%
1kHz, 30W,70V/100V <=0.2% |
|
Frequency response |
20 Hz-20 kHz 0dB-0.5dB |
|
Main supply AC power |
110V - 240V, 50 Hz/60Hz (switching
power) |
|
Dimensions |
215x264x48 mm |
|
Weight |
2.3 Kg |
