For this year appointment with the professionals of the sector, WORK has prepared the launch of new products and important improvements in the functionality and performance of its audio and lighting solutions. Among all the products for AV installers and integrators that WORK is presenting at ISE 2014 (stand 7-M176), UDA 16, the array configuration column, is probably the crown jewel. This new concept of column loudspeaker with line array shape provides many advantages for integrators: controlled beamwidth for almost all frequencies reproduced by the column which leads not only to minimize undesirable effects induced by walls and ceiling reflections (reverbs and echoes) but also to excellent results in reverberant acoustic conditions and a perfect music and speech intelligibility. Another attractive launch prepared for Amsterdam will be the new series of active and passive subwoofers Z15 and Z18. This new series is composed of 4 models, Z15 (single 15), Z18 (single 18) that can be configured passive or active. The active ones add a 1000 W Class D amplifier (Z15 A and Z18 A) and a built-in DSP, which joined, achieve a perfect sound adjustment. This digital sound processor module has been designed to optimize the frequency response adjusting it to the requirements of each device where it is integrated into. The passive models, for its part, add a single 15 woofer (Z15) which has a continuous power up to 500 W @ 8 ? and a single 18 (Z18) woofer that has a continuous power up to 600 W @ 8 ?. Besides, the inclusion of two passive models and two active models allows to increase the number of possible configurations, from an independent subwoofer reinforcement (passive model) to a self-powered system which will enrich a previous amplified installation (active model). In addition, thanks to the bass reflex design with direct radiation, these subwoofers are able to make a Cardioid pattern configuration, which reduces (almost eliminates) the low frequencies radiation backwards, avoiding interferences and unwanted noises on stage. The enhanced BlueLine Digital that WORK will show at ISE 2014 is going to be another new announcement. The latest version of BlueLine Digital System offers up to 64 stereo channels to distribute different audio sources with very low latency. Its plug&play system makes it easier for users to set up, and also offers several intuitive solutions for locally controlling each zone. Besides, it uses the OSC (Open Sound Control) protocol, so it is possible to integrate it in third-party systems, and the whole system can be controlled by a tablet or a smartphone. Other new features are the alarm system and the paging function, incorporated in the new products which the company is currently developing to complete and upgrade the BlueLine Digital System throughout 2014. Among other features of the system, such as remote control, the possibility of installing local wall panels or the PoE (Power Over Ethernet) Technology it is based on, it is worth underlining its modularity. BlueLine Digital brings the possibility of designing and building an audio distribution system that can be completely adapted to any specific needs thanks to its modules. Besides these news, the attendees of the trade fair will have the opportunity to know other products, such as the LM 5, from the LightMouse Series, which allows to remotely and easily control audio and lighting installations using mobile devices. Visitors will also find out about the digital sound processors of the brand, Digiline 8, MX and WPE 26N, along with WORKCAD software, which allows an intuitive configuration of every single parameter besides of providing functionalities such as control through external devices over Ethernet and OSC.